Brief introduction of equipment
Hydrogen peroxide low temperature plasma sterilizer uses hydrogen peroxide (H2O2) as the sterilizing agent. Under low temperature environment, the air in the sterilization cabin is removed through vacuum process, so that hydrogen peroxide can evenly spread to the whole sterilization cabin, sterilize the articles in the cabin, and separate the residual hydrogen peroxide in the cabin through the plasma generator.
advantage
Sterilization stability
The sterilization room is made of aluminum alloy, which has superior thermal conductivity and makes the temperature of the sterilization room more balanced; the hydrogen peroxide purification system makes the diffusion concentration of hydrogen peroxide more uniform.
Intelligent informatization
One key operation, intelligent maintenance reminder of key components, real-time monitoring of physical parameters, display of data on the touch screen and printing through the thermal printer; application of 8G mass storage to save all data in the life cycle of the equipment (optional); with multiple data interfaces, the traceability system can be connected (optional); RFID technology management card case (optional).
High-end configuration
The controller, pressure sensor, solenoid valve, vacuum pump and other key hardware are all imported products.
Trust and reliability
More than 3000 sets have been installed, the operation stability and device compatibility have been verified.
Use peace of mind
Hands on operation training, 24-hour customer service throughout the country, so that you have no worries.
Perfect partner
Chamber apparatus dryer
It is used to dry the lumen apparatus before packing;
The installation position of the dryer is free, with independent control system and LED temperature display. The temperature can be adjusted from 40 ℃ to 80 ℃. It can heat the compressed gas in real time, provide the hot air source for drying, effectively dry the cavity instruments and complex instruments.
Automatic lifting carrier
The electric lifting column can lift the table freely; the lithium battery power supply can charge for a long time; the height memory function can record three positions for convenient use.
Optional configuration
Vacuum drying function module
After cleaning, the pre dried device is put into the sterilization chamber. At a low temperature of 50-60 ℃, the boiling point of the water decreases with the decrease of air pressure. After vacuum drying for 15-60min, the water inside the device will be completely dried.
Data U disk storage
Large capacity USB flash disk stores sterilization information in real time to ensure the safe storage of all data in the life cycle of the equipment. The stored data can be inquired by computer. This configuration can be extended to a traceability system.
Integrated electric constant temperature incubator
The electric constant temperature incubator and equipment are installed in an integrated way, which can display the temperature in real time and the running time of different cultivation groups. The induction type full-automatic cultivation mode is more convenient. It has an independent control system, and the equipment is shut down, so it can still carry out biological cultivation, which is more energy-saving.
Kick switch
With a slight kick on the toe, the sealed door can open and close automatically, freeing hands.
Metal sterilization box
Various specifications of sterilization box, suitable for a variety of instruments and surgical kits, improve the sterilization effect, easy to use.
Paper plastic packaging carrier
The space can be adjusted, and it can be loaded horizontally and vertically. It is suitable for the loading of different sizes of articles, so as to ensure the placement of paper plastic packaging bags meet the sterilization requirements.
评论晒单