[technical advantages]

Aiming at the disinfection and purification technology of indoor air pollution control in hospitals and public places, "semiconductor air disinfector" is developed. The prototype passed the air disinfection identification test. In the 30 m ~ 3 laboratory, 60 minutes of air disinfection test identification and detection, the extinction rate of air natural bacteria was 99.99%. The data showed and verified the effectiveness of the technical route of the invention.

Through the function of multiple disinfection and purification units and the complementarity of each unit, indoor air can be quickly oxidized to kill bacteria, absorb harmful gases and dust in the air, decompose and reduce to uncontaminated H2O and CO2, and output fresh air.

Features of semiconductor electrostatic technology: bipolar semiconductor electrostatic field is used to decompose and break down the negative bacteria, polarize and absorb the dust, and then carry out secondary sterilization and filtration through photocatalyst catalytic device and other components. A large number of treated clean air circulates rapidly, so as to keep the controlled environment in the "sterile and dust-free room" standard.

[functional features]

1. Efficient disinfection: the killing rate of natural bacteria in the air is as high as 99.999%;

2. High efficiency purification: removal of fine dust particles above 0.1 μ m in the air ≥ 99.00%;

3. Broad spectrum sterilization: for bacteria, mould, virus and coliform bacteria in the air;

4. Energy saving and environmental protection: the method of dust collection can realize the recovery of waste gas treatment;

5. Intelligent control: dynamic disinfection (human-machine co-existence), application of gas, particles, oxygen and other sensing technologies;

It can display air quality, PM2.5, temperature, humidity and other practical data;

Content to achieve automatic control of power on and power off;

The wind speed is adjustable from high, medium and low.

6. High grade luxury: adopt the design of microcomputer and luxury LCD screen, choose three disinfection modes: automatic, timed and manual;

7. Convenient maintenance: after semiconductor is used, the contaminated product parts can only be washed with clean water; when the machine needs cleaning or maintenance, there is a prompt on the screen.